ferrosolutions.blogg.se

#Eve ng ltm how to#
#Eve ng ltm password#

Now as the devices are configured with the management IP address.

#Eve ng ltm how to#

The command for assigning the IP address and gateway on Palo Alto is set deviceconfig system ip-address 10.0.0.2 netmask 255.255.255.0 default-gateway 10.0.0.10 ( Note: This is how to assign the IP address and gateway on Palo Alto)Ĭheck the reachability of both firewalls PaloAlto01 and PaloAlto02 from Workstation PC, Now Go to your PC and try to ping firewall from Command Prompt: Initialize PaloAlto02 with management IP address 10.0.0.2/24, please refer below snapshot. Just click on the icon on the lab screen and you will get the console access to the firewall. Now assign the IP address on Palo-Alto02 firewall from Command Line Interface.

#Eve ng ltm password#

Here is the Palo Alto default user name and password Now follow below command to initialize the firewall and assign gateway and management IP address. Task 3:Now assign the IP address on Palo-Alto01 firewall from Command Line Interface. Now assign the IP address from the management subnet, in this case it is 10.0.0.10/24, we will not assign Default gateway for this lab-practice.

Note: Please disable Red marked adapter as this interface is for internet access and you may encounter issues during lab-practice. Configure below Orange marked adapter with the management address of the firewall. Task 2:Now configure network adapter on PC for taking management access. Below diagram shows the configuration on switch for this. Put interfaces Eth1/0, Eth3/1 and Eth4/0 in VLAN 50 i.e. In the basic connectivity Diagram, we will configure the interfaces on switch for management of firewall. Task 1: Here we will use Workstation to manage firewall, interface that we will use for management of firewall.

Lab1 needs to be completed before proceeding to Lab2.

Make sure to power on the devices and take console, there are no initial configurations in this lab.

Login to PaloAlto02 firewall using default username and password and assign IP address 10.0.0.2/24 on Management Interface and default gateway as 10.0.0.10.

Login to PaloAlto01 firewall using default username and password and assign IP address 10.0.0.1/24 on Management Interface and default gateway as 10.0.0.10.

Assign Management IP address 10.0.0.10/24 to eth1 on Workstation PC.

Create VLAN 10 in Switch SW01 and assign Interfaces Eth1/0, Eth3/1 and Eth4/0 in access VLAN 10 for establishing management connectivity for PaloAlto01 and PaloAlto02.

This post will give your detailed overview of how to setup “Initial Configuration of Palo Alto” Access full Palo Alto lab guide here: Palo Alto Lab Guide